Eng | 简体 | 繁體
My favorites
-> -> -> - >
[Knowledge Base]The following message about The Principle Of ... was posted by jk
Visit:458 ,Today:1

The Principle Of Gilding Bronzing Machine

Stamping process is a special printing process without ink, the so-called gilding is that under certain temperature and pressure will process the aluminum foil stamping to the substrate surface, bronzing machine is the completion of stamping process equipment.
The main process is to use the principle of heat transfer. In the closing pressure anodized and substrate contact, the printing plate, the heating plate heats the short-run version has some heat, anodized aluminum heating the hot melt dyeing resin layer and adhesive melting, pigmented resin layer viscous force decreases, and the special heat sensitive adhesive melt viscosity increases, the aluminum layer and the anodized film peel and transfer to the substrate, as the pressure of dismounted, adhesive rapid solidification, aluminum layer firmly attached to a hot stamping process in the substrate.

Last modified: 2013-08-27 14:30:40
  • Report this Ad - Welcome to Make a Pubilc Comment : The Principle Of Gilding Bronzing Machine

    * Required information

    Excellent Wrong Category Prohibited Contents Spam Outdated Other

    Full Name: *
    Message: *

Related seek: Booth Designing - Exhibitions Fairs - Convention Service - Others - Exhibition Convention Center

©2022 Swkong.com