Supply 13.56MHz RFID Reader Module Jinmuyu Electronics
JMY501 series module is the RFID reader/writer module that supports ISO14443 TYPE A, ISO14443-TYPE B, ISO15693. Inlayed the UART and IIC interfaces. The following is the simple introduction of JMY501H.
Model: JMY501H
1.Introduction
JMY501H is a RFID read/write module with an UART and IIC serial port. The module supports ISO/IEC14443A&B and ISO/IEC15693 contactless cards. The module has various functions. User operates the module via simple commands. The module has excellent performance and stability. The antenna is separated from the module.
2.Characteristics
A.PCD model:NXP CL RC632
B.Working frequency:13.56MHz
C.Card supported:Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX, SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL smart cards(both ISO14443A & ISO14443B) , TI TagIt, I.Code SLI, ST LRI and other ISO15693 tags
D.Anti collision ability:Full function anti collision; be able to process multi-cards; be able to set operate single card only
E.Auto detecting card:Supported, default OFF
F.EEPROM:512 Bytes
G.Power supply:DC 5V (±0.5V)
H.Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
I.Communication rate: IIC: 400Kbps, UART: 19.2Kbps/115.2Kbps
J.Max. command length:254 Bytes
K.Interface level:3.3V (TTL level; 5V tolerance)
L.Power consumption: 70mA
M.Operating distance:100mm (depending on card and antenna design)
N.Dimension:21mm * 42mm
O.Package: DIP32
P.Weight:About 15g
Q.ISP:Supported
R.Operating temperature:-25 to +85
S.Storage temperature: -40 to +125
T.RoHS:Supported
3.Antenna
We supply the antennas. There are three models: TX500, TX501 and TX502. The antenna customization is welcomed.
4.Protocol
There are IIC and UART interface between the module and IIC. We recommend using IIC whose baud rate is 400Kbps. And IIC is able to connect with 128 devices. We have detailed sample source code for users.
5.Automatic Detecting card
Automatic detecting card supports ISO14443A and ISO15693. Automatic detecting card supports full function of Mifare 1k/4k and ultra light. Automatic detecting card support only one card operation.
We have KELL project in C51 and ASM51 format to help users. If need user manual or any helps, feel free to contact us.
Login our website and looking for more RFID products.
www.jinmuyu.com
These could be used for industrial automation, Payment, Membership Management, Brand protection and security, Product line management, Medicine and pharmacy management, City Card, Anti-thief, ticketing, Access control, Post service management and so on.
These could be used for industrial automation, Payment, Membership Management, Brand protection and security, Product line management, Medicine and pharmacy management, City Card, Anti-thief, ticketing, Access control, Post service management and so on.
